abcPLASTISOLTM-H2R125
High range water reducing super plasticizer admixture for concrete.
Description:
abcPLASTISOL-P200 is the main material for the concrete admixture.
It shows the high water reducing effect based on Sulphonated Napthalene Polymers.
Description
abcPLASTISOL-H2R125 is based on Sulfonate Naphthalene Polymers and supplied as a dark brown liquid. abcPLASTISOL-H2R125 has been specially formulated to give water reductions up to 15% without loss of workability or to produce concrete of reduce permeability.
Uses:
- Site Mixed Concrete
- To produce concrete with extreme workability characteristics.
- To maintain minimum water cement ratio in concrete
- To produce high grade concrete and above by water reduction in the concrete mix.
- Design high performance grout and wet shot create mixes.
Advantages:
- Substantial improved in workability.
- Improved cohesion and particle dispersion minimizes segregation bleeding and improved pumpability
- Improved density and surface finish
- Feasible to use to make good fare face concrete
- Chloride free dose not attack reinforcement and pre stressed cable.
Technical data:
| Color | : Dark Brown Liquid |
| Specific Gravity | : 1.15±0.02 at 25o C |
| Chloride Content | : 0.0% |
| PH | : 4.5 +1.0 |
| Viscosity | : 450+200 cps |
| Salt Scaling Resistance | : 90% to 95% |
Standard Compliance:
abcPLASTISOL-H2R125 complies with IS 9103 & EN 934-2
abcPLASTISOL-H2R125 conforms to ASTM C-494, Type “A”.
