• abcAQUAGUARDTM

    Water proofing admixture

    Description:

    abcAQUAGUARD is a liquid polymerized water proofing admixture. abcAQUAGUARD is white colored semi paste liquid based on reactive additives with anti corrosive properties. abcAQUAGUARD is chloride
    free and does not affect the concrete.

  • abcAQUAGUARDTM-HWP100

    Integral water proofer for concrete and mortar.

    Description:

    abcAQUAGUARD-HWP100 is a liquid admixture for concrete to achieve high resistance to water ingress. It is based on a blend of surface active agents and  refined lignosulphonate.
    abcAAQUAGUARD-HWP100  has been specially formulated to give high reductions up to 20% without loss of workability or to produce high quality concrete of reduced permeability.

  • abcBLOCKMIX TM

    High strength for Block

    Description:

    abcBLOCKMIX is low dosage admixture, after using it, Cement concrete set and harden firstly, Initial and final setting intervals short. This product can well suit cements.

  • abcCECOATTM – MC

    High strength micro concrete

    Description:

    Shrinkage Compensated, free flow structural grade micro concrete for concrete repairs and strengthening (M 50 grade).

  • abcELASTEMATETM -1200

    5mm self adhesive Bituminous Membrane

    Description:

    Waterproofing self-adhesive membrane, producer with polymer modified bituminous adhesive, reinforced with composite base felt in the middle and the adhesive layer protected by Silicon Release sheet.

  • abcELASTEMATETM -2800

    3mm Torch Applied Bituminous Membrane

    Description:

    abcELASTEMATE-2800 Torch Applied Membrane is a line of polymer-modified bitumen waterproofing membrane of the highest quality.

  • abcJOINTSEALTM

    Joint compound in concrete

    Description:

    abcJOINTSEAL is a liquid bonding agent. abcJOINTSEAL is formulated for bonding new concrete with old.

  • abcPLASTICASTTM – 555PCE

    PCE based high range reducing super plasticizing admixture for concrete.

    Description:

    abcPLASTICAST-555PCE is a unique combination of the latest generation super plasticizes on a modified Poly-carboxylic Ether (PCE) polymer with long lateral chains. The product has been primarily developed for applications in ready mix and site batched concrete. abcPLASTICAST-555PCE makes possible for long time slump retention but using less water than other products.

  • abcPLASTICASTTM – QC300

    High early strength, high range water reducing/super plasticizing admixture for precast concrete

    Description:

    abcPLASTICAST-QC300 is a super plasticizer for high performance
    concrete, high strength concrete high volume fly ash slag concrete
    and grouting, self-leveling screed mortar.

  • abcPLASTICON-NG01

    abcPLASTICONTM-NG01

    Concrete admixture

    Description:

    abcPLASTICON-NG01 is liquid white or light brown colored multipurpose concrete admixture.

  • abcPLASTISOL-10 Ltr

    abcPLASTISOLTM

    Water reducing admixture

    Description:

    abcPLASTISOL is an excellent plasticizer and waterreducing admixture, which gives high workability to produce dense, compact and honeycomb free concrete resulting in saving of cement cost. Reduces W/C ratio by 10% to 15%, increases workability, higher cohesion, easier placing, reduces risk of segregation and bleeding, better compaction & finishing, increases strength and durability.

  • abcPLASTISOL-H2R125

    abcPLASTISOLTM-H2R125

    High range water reducing super plasticizer admixture for concrete.

    Description:

    abcPLASTISOL-P200 is the main material for the concrete admixture.
    It shows the high water reducing effect based on Sulphonated Napthalene Polymers.